Any one use the Seahorse

[Nytro69]

If so do you have pictures for an example of how you fit it in? And what the exterior of the case looks like (Like is there ribs on the outside or is it smooth hard to tell on the website) Also is there room for the D380, MS20 in shallow box and later a Slave flash in a shallow box or will I need to go to the next bigger size box??

[OhioBowHunter]

Nytro,

If you like to keep your Components Modular and want the Digital camera, Pir Controller Board, Slave flash and extra battery source within your case. Your gonna need to go to the next sized case up... I use the Pelican cases for mine the 1120 is to small I use the 1150 for my Digital slave setups... the 1120 works fine except for when going to the slave flash setups then the extra room is needed. also for extra Battery power... I would Imagine you could maybe gut the Viv and slave boards as well as your Pir controllers and get them into 1- Box and offer clearance, But I like to keep mine Modular and seperated.

Dan

[MrPike]

Nytro,

I think you can fit it in the SE120. I laid all the components out in the box and was able to fit a D380 with external power, MS20 with timer, and a slave flash with its own power in the box. I think Washout has some finished pics on his site with this setup.

[Washout]

I get everything is the SE 120 except the heavy duty battery that OBH uses, I'm using 4 C cells for extra power. You can see it all on my webshots.

[Nytro69]

Thats it! Washout, thanks thats exactly what I was looking for! Perfect, looks like everything will fit and still have room for a slave flash! One more question though.... Hey Washout, ever hear the saying "Imitation is the sincerest form of flattery."????