Scope won't stay put!!!

[redlance]

I tried sighting in my new scope on my model 94 RWS, but the mount keeps working loose. It has a 3/8" groove with scope stop, but the recoil seems to always work the mount loose. Any help! Redlance

[QALHNTR]

Not a really technical answer, but it worked with my .280 Remington recoil. I used a liberal amount of Loctite and nothing has moved since. There are different "flavors" of Loctite, from "small screw" locker that you could bust loose with a little muscle to "secures gears" which will only come off with lots of heat or a 50-ton press. Good luck.

[machine]

Make sure your screws in the stock are tight, and try some red
Loctite!!!!

http://www.jesseshunting.com/forums/style_emoticons/<#EMO_DIR#>/smiley-faces-toast-beers.gif

[redlance]

Thanks for the answers! Redlance

[donack456]

Most air rifle users suggest using the Blue Loctite rather then the Red because the blue is easier to break loose. The Red is almost a permanent fix it takes extreme effort and heat to loosen up the Red variety. On a scope mount blue should do it, espeically if you ever decided to upgrade or replace the scope mounts.

Red if you never ever want to remove the mounts evers