Ms20 10K resistor

[encorepistol]

When connecting the ms20 to AEHs timer board is the 10k resistor necessary when making the jump across the old relay since his board has an on board voltage regulator or would a 4.7K work as well since I don"t have a 10K here.

[ArkansasElkHunter]

yes, other wise you would have a direct short to ground. It creates the High to low signal when triggered

[Tinhorn]

and the 4.7K will work fine

[encorepistol]

Thanks guys I'm almost ready to build this thing.