P-52 Question

[Tailgate]

I was wondering if the p-52 and the P-32 were the same. Has anyone used one for a trail cam, if so do you wire them the same as a P-32 and do they have about the same trigger speed as the P-32.

[thehunter]

The P52 hacks the same as a p32. The 52 is larger and has the extended lens. You can modify the case (1040) with a pvc cap and let the lens stick out past the case or get a larger case and have it fit flush with the case. I find that the pictures are the same with both cameras.

[Tailgate]

Thanks for the info..
A family member has bought them a new camera and has offered to give me their old P-52. So since the price is right.... I see another trail cam in my future. http://www.jesseshunting.com/forums/style_emoticons/<#EMO_DIR#>/smiley-faces-toast-beers.gif

[thehunter]

Yes, they make a fine trail cam. They take great pictures.

[Tailgate]

thehunter,
It sounds like you have built one out of a P-52....
I don&#39;t suppose that you have any pictures of your setup that you would like to show off ?

[Eastky Bowhunter]

Heres one I built with a P52. Its in a 1040 case and controlled by a LE board. I cut down a PVC pipe cap for the extended lens to fit into. You will notice that there is not a hole for the flash. The flash on the camera does not work so I use it for daytime only video and pictures.

http://i81.photobucket.com/albums/j239/eastky_bowhunter/units/February2007001.jpg

http://i81.photobucket.com/albums/j239/eastky_bowhunter/units/February2007006.jpg

[Tailgate]

That is a snug fit. looks good.
A universal board probably wouldn&#39;t fit in a 1040 case would it? I like the 1040 case better than the 1060,but I have a u-board that I&#39;m not using right now so that is the board that I thought I would probably use.

[Eastky Bowhunter]

<div class='quotetop'>QUOTE (Tailgate @ Oct 6 2007, 05:14 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=912939)</div>
That is a snug fit. looks good.
A universal board probably wouldn&#39;t fit in a 1040 case would it? I like the 1040 case better than the 1060,but I have a u-board that I&#39;m not using right now so that is the board that I thought I would probably use.[/b]

I don&#39;t think the Uni would fit. Its in the field right know so I can not check to see if it would fit at the end of the camera.

[Tailgate]

How do you attach that cam in the picture to the tree?

[Eastky Bowhunter]

<div class='quotetop'>QUOTE (Tailgate @ Oct 6 2007, 06:08 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=912956)</div>
How do you attach that cam in the picture to the tree?[/b]


http://ruffweb.com/ecamstroe/